Products 01. INDUSTRIAL CAMERAS SVS Vistek Allied Vision Zebra Technologies JAI Focatek iRayple Opto Engineering ATIK The Imaging Source Lucid Mikrotron ISVI I-tek Xenics Imi Tech Emberion 02. INDUSTRIAL LENS Schneider-Kreuznach Carl Zeiss Opto Engineering DM Optical Kenko Tokina Myutron Kowa 03. INDUSTRIAL LIGHTING Smart Vision Lights Vislight 04. HYPERSPECTRAL CAMERAS Spectricon 05. LIGHTING CONTROLLER Viscont Gardasoft 06. LENS CONTROLLER Optotune 07. FRAME GRABBER Zebra Technologies Kaya Instruments Advantech Bitflow 08. 3D CAMERA SYSTEM Mech-Mind Percipio 09. DIGITAL MICROSCOPE Opto GmbH 10. IMAGE PROCESSING SOFTWARE (Deep Learning – AI) Neurocle 11. IMAGE PROCESSING SOFTWARE (Rule Based) Zebra Technologies 12. INDUSTRIAL PC Zebra Technologies Lex System 13. INDUSTRIAL MOUNTING Swivellink 14. SENSOR Canon Metrology Sensors GmbH Custom Sensors (Space Imaging) 15. CABLES Alysium Nortech
01. INDUSTRIAL CAMERAS SVS Vistek Allied Vision Zebra Technologies JAI Focatek iRayple Opto Engineering ATIK The Imaging Source Lucid Mikrotron ISVI I-tek Xenics Imi Tech Emberion
02. INDUSTRIAL LENS Schneider-Kreuznach Carl Zeiss Opto Engineering DM Optical Kenko Tokina Myutron Kowa
03. INDUSTRIAL LIGHTING Smart Vision Lights Vislight
04. HYPERSPECTRAL CAMERAS Spectricon
05. LIGHTING CONTROLLER Viscont Gardasoft
06. LENS CONTROLLER Optotune
07. FRAME GRABBER Zebra Technologies Kaya Instruments Advantech Bitflow
08. 3D CAMERA SYSTEM Mech-Mind Percipio
09. DIGITAL MICROSCOPE Opto GmbH
10. IMAGE PROCESSING SOFTWARE (Deep Learning – AI) Neurocle
11. IMAGE PROCESSING SOFTWARE (Rule Based) Zebra Technologies
12. INDUSTRIAL PC Zebra Technologies Lex System
13. INDUSTRIAL MOUNTING Swivellink
14. SENSOR Canon Metrology Sensors GmbH Custom Sensors (Space Imaging)
Custom Sensors (Space Imaging)
15. CABLES Alysium Nortech
The VC-08ES is an 8-channel LED light controller designed for demanding industrial vision applications. It delivers stable constant-current control with high-speed strobe output up to 100 kHz, making it well-suited for environments where consistent and precise illumination is critical. The unit supports a wide input voltage range of 12–48VDC and can output pulse current up to 20A, with continuous mode limited to 2A. Each channel operates independently, giving users fine-grained control over multiple light sources simultaneously.
The controller offers three operating modes — continuous, pulse, and switch — and accepts 8 opto-isolated trigger inputs (5–24V, common cathode) for direct synchronization with camera triggers and PLC outputs. Communication is handled via RS232 serial port and Ethernet (TCP/UDP), and the light source interface uses 5.08mm pitch terminals with four 4-pin connectors. It is compatible with most industrial LED lighting systems, making integration into existing automation setups straightforward.
Typical applications include PCB and electronics inspection, semiconductor inspection, medical imaging, and packaging and sorting systems. The VC-08ES operates in temperatures from -5°C to 50°C and humidity up to 85% RH (non-condensing), and has a compact footprint of 215 × 58 × 53 mm.
Properties of light that are invisible to humans can be made visible with cameras from SVS-Vistek. These cameras extend the standard industrial image processing system in terms of polarization planes or wavelengths from infrared to ultraviolet.
The invisible see and measure
Wavelengths from infrared to ultraviolet enable invisible markings, the identification of materials and much more. Properties of light such as polarization facilitate industrial inspection in many industrial applications with non-metallic materials. We offer highly sensitive cameras for technical and biological applications.
SWIR wavelengths up to 1,700 nm
UV wavelength range from 200 nm
Only one sensor for SWIR and VIS wavelengths
High quantum efficiency and sensitivity
Measurement of the polarization angle
Separate intensities for horizontal and vertical polarization
Proven industrial machine vision design
GenICam and GenTL interface
Depending on model with GigE Vision, 10GigE, CoaXPress-12 or USB3 Vision interface
Our SWIR cameras are based on Sony SenSWIR technology and our proven EXO and FXO camera designs. Due to the wide wavelength range and high sensitivity, they enable extremely compact inspection solutions in the VIS range from 400nm up to the SWIR range at 1700nm. Our innovative thermal design is the basis of the outstanding optical quality and the excellent dynamic range. The integrated 4-channel strobe controller supports complex analysis scenarios.
Sony SenSWIR sensor with 400 – 1700 nm spectral sensitivity and high quantum efficiency
Advanced two-point NUC (Non Uniformity Correction)
CoaXPress-12 for lowest latency and highest speed
10GigE for economical bandwidth and easy integration
LUT, binning, ROI, burst mode
Up to 60°C operating temperature
Industrial TTL-24V I/O interface with SafeTrigger, logic functions, programmable sequencers and timers, RS232 interface, electrical and optical inputs, GenICam and GenTL
ATTENTION: This product is subject to export control and requires written information on intended use and final destination!
All of our special cameras for invisible properties of light are based on the proven camera concepts of the EXO series and the FXO series. While the EXO covers the established GigE Vision and USB3 Vision interfaces, the FXO series can provide the highest frame rates with its high-speed 10GigE and CoaXPress-12 interfaces.
A close thermal connection of the low-power optimized electronics and the sensor to the housing enables operating temperatures of up to 60°C. The integrated power I/O interface enables simple control tasks to be performed with hardware precision via the PLC functionality. Up to 4 LED lights can be controlled directly without additional drivers, ideal for the identification of materials. All Beyond Visible cameras from SVS-Vistek have the following features: Region of Interest (ROI), logical trigger functions (PLC) with programmable timers, sequencers and logic, electrical and optical inputs are specified with TTL-24V.
Short-wave infrared (SWIR) cameras with InGaAs sensor technology
Goldeye cameras are equipped with InGaAs sensor technology making them sensitive in the short wave infrared spectrum ranging from 900 nm to 1,700 nm. Some models have extended sensitivity in the visible spectrum down to 400 nm or up to 2200 nm. All Goldeye SWIR cameras can be operated at very high frame rates and capture outstanding low-noise images. They are the perfect choice for industrial and scientific applications beyond the visible spectrum. All Goldeye models are available with either a Camera Link or a GigE Vision interface.
Goldeye is a compact industrial and advanced scientific SWIR camera series. Benefit from its high versatility!
Its modular design offers you SWIR cameras in multiple-flavors whether resolution, interface, lens-mount, optical filter or sensor cooling wise (TEC1, TEC2, TECless).
Multiple image processing features and optional sensor cooling ensure you best imaging results with low-noise, high linearity and dynamic range
High frame rates enable to speed up your processes
Experience an eased system integration supported by features like, Power over Ethernet enabling single cable solutions, comprehensive I/O control functionality, or multiple mounting options.
Application areas: Dimensional inspection, character inspection, microscope illumination, LCD calibration, detection of various damages and contaminants, 2D code reading, component inspection on substrates, etc.
• Diverse angles, can be designed according to requirements
• Wavelength and color temperature are selectable, and different color combinations are also possible.
• Easy to install and compact design
High-density LED display with high brightness
• Optional diffuser plate to increase light source uniformity
• Light sources can be customized according to customer needs
JM Vistec supplies imaging sensors specifically engineered for the space environment, from high-resolution TDI-CMOS line sensors for push-broom earth observation cameras, to radiation-hardened area array sensors for scientific instrumentation. Where no catalogue device meets your mission requirements, we design and build custom CMOS sensors around your specific payload needs.
Our team works with system integrators and satellite manufacturers to match sensor specifications to orbital parameters, optical designs, and mission lifetime requirements, whether that means selecting an existing device or developing one from the ground up.
Can Lid Code Pattern Inspection Our system is designed to accurately inspect various code patterns on can lids, ensuring precise identification and quality control.
Challenging Code Detection: Some code patterns blend with the background, making them difficult to distinguish and accurately detect.
High-Speed Inspection of Seat Belts – Cross Stitching We developed a comprehensive machine vision system, combining advanced hardware and integrated software, to perform high-speed, precise inspection of seat belt cross stitching. This system ensures the accuracy and quality of every stitch, maintaining safety and compliance standards at scale.
We developed an advanced AI Vision System designed to detect defects in pen components. This system performs precise analysis, establishing clear thresholds for Pass/Fail assessments to ensure consistent product quality.
10 Kaki Bukit Ave 1, #07-06, Singapore 417942
04. HYPERSPECTRAL CAMERAS
10. IMAGE PROCESSING SOFTWARE (Deep Learning – AI)
11. IMAGE PROCESSING SOFTWARE (Rule Based)
资料来源：企业官网公司简介（复核日期：2026-10-07）。